1. AP2U Home
  2. Washer
  3. Lid Switches & Locks
  4. WP3949238 LID SWITCH
WP3949238 LID SWITCH
2U WP3949238 REPLACEMENT FOR WHIRLPOOL / KENMORE WASHER LID SWITCH - 3949238

WP3949238 LID SWITCH

0 Review(s) Write a Review
Ap2U PRICE: $27.58
OEM/Competitors Price:$40.99
You Save:$13.41(33%)
WP3949238 AP2U REPLACEMENT FOR WHIRLPOOL / KENMORE WASHER LID SWITCH - 3949238
AP2U PART#: WP3949238
AVAILABILITY *IN STOCK
Available To Ship: 39
*NOTE: THIS ITEM IS AN AP2U NON OEM REPLACEMENT PART - 1 YEAR
WP3949238
AP2U REPLACEMENT FOR WHIRLPOOL / KENMORE Clothes Washer Lid Switch - 3949238

LID SWITCH ASSY USED ON SOME WHIRLPOOL, AMANA, KENMORE, ADMIRAL, CROSLEY AND SEVERAL OTHER BRAND CLOTHES WASHERS

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
If the washer fills and agitates, but does not drain or spin then the lid switch has likely failed.

Approx. 2"L x 2"W

When this part fails, you may experience the following symptoms:
Clothes Washer Tub fills and agitates but does not spin or drain How to test: Physically inspect the Lid Switch.
Make sure the striker is functioning and aligned with the hole over the switch.
If present, make sure the metal strip is not bent out of position.
 If your switch uses a mercury switch, make sure the mercury envelops the internal contacts when it is in the closed lid position.
If the Lid Switch passes physical inspection, measure for continuity and replace if open.

Recently Viewed Items

Subscribe To The AP2U Newsletter

TOP